LAWN & GARDEN EQUIPMENT::
Auger 1Man Towable Hydraulic Hole Digger

Manufacturer Link: <Click Here>
Where to find Auger 1Man Towable Hydraulic Hole Digger in Eden Prairie

Image for reference only
Actual item may look different
Click on image for larger view

Manufacturer: GENERAL
Model: DIG-R-MOBILE 660
3 Hour: $84.00
Daily: $170.00
Weekly: $600.00
Comments:
  • Available bit sizes: 6", 8", 10", 12", and 16"
  • MODEL 660
  • POWER SOURCE
  • 13 hp (9.6 kW) category @ 3600 RPM, 4-cycle gasoline engines equipped with Lo Tone muffler and spark arrestor
  • FUEL SPECIFICATION Gasoline, regular or unleaded
  • STARTING METHOD Mechanical rewind
  • AIR CLEANER Dual element type
  • FRAME
  • STRUCTURE Unitized welded steel plate and rectangular tube
  • RESERVOIR LOCATION Center mounted over axle
  • AUGER STORAGE SNAP-LOKTM auger storage system locks auger in the travel position when maneuvering on the jobsite
  • SIDE TILT ADJUSTMENT 20" from vertical, infinite position, with locking mechanism
  • TOWBAR Quick-attach type, complete with SAE Class II coupler, adjustable from 17/8" (48 mm) to 2" (51 mm) ball size and safety chains.
  • Included as a standard accessory
  • TOW CONFIGURATION From operator position end
  • HYDRAULIC SYSTEM
  • CONFIGURATION Open center type
  • HYDRAULIC PUMP Fixed displacement, gear type, with third line return to reservoir
  • SYSTEM FLOW/ 8 GPM (30 lit/min) @ 2000 PSI (140 kg/cm2), Hydraulic Tool Manufacturers Association (HTMA) Class II
  • PRESSURE PARAMETERS
  • HYDRAULIC MOTOR Low speed, high torque (LSHT), geroler type direct coupled to the auger
  • MAXIMUM DRILLING TORQUE 276 ft. lbs. (374 N.m.) @ 2000 PSI (140 kg/cm2)
  • AUGER ROTATION SPEED 144 RPM, no load
  • AUGER FORWARD/ Four way, directional control valve, lever actuated, spring loaded to return to the neutral position when released
  • REVERSE CONTROL
  • FILTRATION Integral suction screen to pump, return line diffuser into reservoir and externally mounted, 10 micron return line filter
  • POW-R-PORTTM Built-in power source for operating HTMA Class II hydraulic tools. Contact the factory for specific information
  • TOOL CIRCUIT
  • RESERVOIR CAPACITY 5 US gallons (19 lit)
  • AUGER
  • DESIGN Auger construction features Pengo type, cast-steel boring heads, forged-steel teeth and cast-steel screw bits for maximum performance and
  • versatility in a wide cross section of soil compositions. Thick, cross-sectioned helicoid or sectional-type auger flighting deliver strength and
  • wear resistance. Flighting pitch is set to produce cleaner, more usable holes in sandy or granular type soils. All boring head wear parts are
  • field replaceable.
  • DIAMETERS 2" (51 mm) to 18" (457 mm)
  • LEAD AUGER AND A full line of lead augers and continuous-flighted auger extensions designed to extend the digging depth is available in standard 36" (914 mm)
  • AUGER EXTENSION LENGTH effective lengths. A non-flighted auger extension is available in a standard 15" (381 mm) effective length.
  • GENERAL
  • AUGER DRIVESHAFT Choice of three options: 13/8" (35 mm) hexagon (General), 7/8" (22 mm) square (Ground Hog), or Stihl type.
  • CONFIGURATION Required configuration to be specified.
  • TIRES 4.80-12 highway use rated
  • LENGTH 113" (2870 mm)
  • WIDTH 41" (1041 mm)
  • OPERATION WEIGHT
  • (LESS TOWBAR) 440 lbs (200 kg)

Also check the following item(s) related to the above:
* Prices are subject to change. Tax and other fees not shown in above price estimate.

* Please call us for any questions on our auger 1man towable hydraulic hole digger rentals in Eden Prairie Minnesota, Bloomington, Chanhassen, Minnetonka and surrounding Twin Cities communities.